High Pressure Air Cooler & Air Cooled heat exchanger For Oil and Gas
1.Features of Wintech Air cooler & Air Cooled Heat Exchanger
special engineered dry air cooler ,low operating cost ,small pressure drop ,excellent performance of frost resistance,
Well Equiped with high effiency motors and quiet fans ,noise no more than 85db
optional vibration sensor , VFD control cabinet is available .
2.Air Cooler Design
we have experienced R&D team and expertise software such HTRI ,affirmable technical solution is provided , just send us datasheet , we'll take care your project .
3.Well Equiped with extruded finned tube bundles ,split headers with plugs
multiple tubes for your choice : SA179, SA213 TP 304, SMo254,SA192
optional coatings against marine corrossions for AL fins
II Related Products
1.Full welded BLOC plate heat exchanger
special engineered for liquid to liquid ,condensation, reboiling,
gas cooling,particularly for limited floor area
Design Pressure :0-3.2 MPa
2.All Welded Round Plate and Shell Heat Exchanger for Extreme Temperature and Pressure.
Engineered for demanding duties with high pressure and temperature ,outperform
the traditional tube and shell types,recommended for offshore platform .
Design Pressure :0-15 MPa
3.Semi-circular shell and plate heat exchanger
engineered for extreme duties with high pressure and temperature ,outperform
the traditional tube and shell types.
Design Pressure :0-15 MPa
4Air Preheater with Full Welded Stainless Steel Plate Heat Exchager
Engineered for energy consersvation from flue gas ,delayed coaing,dry gas
hydrogen,catalytic cracking with high efficiency and small foot print.
5.Silicon Carbide Tube and Shell Heat Exchanger
new type ,high crossive resistance at dew point of flue gas ,the best solution for GGH.
About WINTECH
WINTECH is a direct manufacturer of heat exchangers,including
All welded plate heat exchanger, Plate and shell heat exchanger , GGH heat exchanger,
Semi cicular plate and shell heat exchanger , Air cooler ,Air preheater , Evaporator.
Stainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air cooler
WINTECH has been recognized as qualified supplier of SINOPEC ,CNPC,CNOOC ,PETRONAS ,
1. OUR WORKSHOP
2. OUR R&D DEPARTMENT
3.BRIEF INFORMATION OF OUR HEAT EXCHANGER
Technical Parameters For Your Reference:
Customization is Avaliable :
We can specially customize products if you tell us any special requests, such as spare parts, cylindricaltank, material, output, pump. ..
1.Features of Wintech Air cooler & Air Cooled Heat Exchanger
special engineered dry air cooler ,low operating cost ,small pressure drop ,excellent performance of frost resistance,
Well Equiped with high effiency motors and quiet fans ,noise no more than 85db
optional vibration sensor , VFD control cabinet is available .
2.Air Cooler Design
we have experienced R&D team and expertise software such HTRI ,affirmable technical solution is provided , just send us datasheet , we'll take care your project .
3.Well Equiped with extruded finned tube bundles ,split headers with plugs
multiple tubes for your choice : SA179, SA213 TP 304, SMo254,SA192
optional coatings against marine corrossions for AL fins
II Related Products
1.Full welded BLOC plate heat exchanger
special engineered for liquid to liquid ,condensation, reboiling,
gas cooling,particularly for limited floor area
Design Pressure :0-3.2 MPa
2.All Welded Round Plate and Shell Heat Exchanger for Extreme Temperature and Pressure.
Engineered for demanding duties with high pressure and temperature ,outperform
the traditional tube and shell types,recommended for offshore platform .
Design Pressure :0-15 MPa
3.Semi-circular shell and plate heat exchanger
engineered for extreme duties with high pressure and temperature ,outperform
the traditional tube and shell types.
Design Pressure :0-15 MPa
4Air Preheater with Full Welded Stainless Steel Plate Heat Exchager
Engineered for energy consersvation from flue gas ,delayed coaing,dry gas
hydrogen,catalytic cracking with high efficiency and small foot print.
5.Silicon Carbide Tube and Shell Heat Exchanger
new type ,high crossive resistance at dew point of flue gas ,the best solution for GGH.
About WINTECH
WINTECH is a direct manufacturer of heat exchangers,including
All welded plate heat exchanger, Plate and shell heat exchanger , GGH heat exchanger,
Semi cicular plate and shell heat exchanger , Air cooler ,Air preheater , Evaporator.
Stainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air coolerStainless Steel Welded Evaporative Air cooled Heat Exchange dry Cooler, finned tube desert air cooler
WINTECH has been recognized as qualified supplier of SINOPEC ,CNPC,CNOOC ,PETRONAS ,
1. OUR WORKSHOP
2. OUR R&D DEPARTMENT
3.BRIEF INFORMATION OF OUR HEAT EXCHANGER
| Plate material | Stainless steel(SUS304,316L etc ),Titanium and palladium fined tube, silcon carbonbide coated tube ,glasses |
| gasket material (some type without gasket) | NBR:(applicable temperature -15-+120ºC) HNBR: (applicable temperature -15-+140ºC) EPDM: (applicable temperature -25-+150ºC) HEPDM: (applicable temperature -25-+170ºC) FPM: (applicable temperature -5-+180ºC) NEOPREKE: (applicable temperature -5-+130ºC) VNQ: (applicable temperature -65-+250ºC) |
| Thickness of plate | 0.6mm |
| Features | high reliability and lower operation cost |
| Compact structure, easy installation | Thin plate large thermal transfer surface CIP |
| Less weight | Only 20-30% weight of shell-tube heat exchanger |
| Less water consumption | High thermal efficiency allows BPHE only 1/3 of cold water consumption of shell-tube exchangers. |
| maximized uptime | full welded structure make it possible for more uptime challange demanding duties with Up to 350°C temperature and 100 bar pressure withstand agressive medias |
| Minimized downtime | The greatest turbulence in the flow results in less fouling and fewer cleaning |
| certification | CE ,ISO ,ASME |
Technical Parameters For Your Reference:
| Medium | Gas to Gas, Liquid to Liquid, Gas to Liquid, |
| Design Temperature: | 350ºC |
| Design pressure | ~12MPa |
| Plate Material: | 304,316L,AL-6XN,Hastel loy C-276,254MO,nickel, nickel base alloy |
Customization is Avaliable :
We can specially customize products if you tell us any special requests, such as spare parts, cylindricaltank, material, output, pump. ..
