Hey everyone, it’s Jake here, and if you’ve ever worked with roller cold forging machines, you know one thing for sure: this equipment is a workhorse, but it won’t run for long without the right lubricants. I’ve been supplying roller cold forging machines for over 12 years now, and I can’t tell you how many times I’ve had a client call me panicking because their machine started making weird noises, or their rollers are wearing out way faster than they should—most of the time, it’s just that they grabbed the wrong lube, or they didn’t know there are specific lubricants made exclusively for these beasts. Today, I wanna break down what lubricants we actually recommend for our machines, why it matters, and the mistakes I see folks making all the time. Roller Cold Forging Machine

First, let’s get on the same page about what a roller cold forging machine does, real quick. When you’re cold forging metal—think making automotive parts, fasteners, even some aerospace components—you’re pushing raw metal (usually a rod or wire) through rotating rollers that shape it without heating it up. No heat means stronger parts, less waste, faster production, but it also means the metal and the machine parts are grinding against each other under huge pressure. Like, we’re talking tens of thousands of pounds of force here. Regular motor oil? That’s not gonna cut it. It’ll break down in minutes under that kind of load, or it’ll gum up the rollers, or even cause seizing that can ruin a whole batch of parts and damage the machine. That’s the last thing anyone wants when they’re trying to hit their production targets.
So let’s get to the good stuff—the lubricants we actually use and recommend for our roller cold forging machines, sorted by what part they’re for, because trust me, not every part gets the same lube. I see people slapping the same oil on the rollers and the gearbox, and that’s a one-way ticket to trouble.
First up, the big one: the roller contact surfaces, where the metal is actually being shaped. This is the most critical area because it’s where all that massive pressure and friction are happening. For this, we use extreme pressure (EP) gear oils, but not just any EP oil—we specify ones that have a viscosity between 220 and 460 cSt at 40°C. Wait, let’s translate that to regular talk: that’s thicker than your average engine oil, which is usually around 10 to 50 cSt. Why thicker? Because it needs to stay on those roller surfaces under all that pressure, not get squeezed out. But not too thick—if it’s too heavy, it’ll cause drag, make your motor work harder, and slow down production.
But it’s not just viscosity. The EP additives here are non-negotiable. We need oils with sulfur-phosphorus (S-P) additives that form a protective film on the metal surfaces. When two metal parts rub together under that kind of force, the film keeps them from welding together (that’s called galling, and it’s a nightmare) or wearing down too fast. I had a client last year who was using a generic industrial gear oil for this part—after three months, his rollers were so worn he had to replace them for $8,000. Switched him to our recommended EP oil, and six months later he called me saying his rollers look like new, he hasn’t had a single quality issue with his parts, and his energy bill went down because his motor wasn’t working as hard. That’s the kind of win I love to see.
Next, the gearbox and the main drive components. These are the parts that turn the rollers, so they need lubrication that handles constant speed and load, but not as much extreme pressure as the actual forming surfaces. For gearboxes, we usually recommend ISO VG 150 to 220 EP gear oils. The reason it’s a lower viscosity than the roller oil is because the gear teeth are moving faster, so a thicker oil would create too much churning (that’s the drag I mentioned earlier) and generate more heat. Heat is another enemy here—if your gearbox runs too hot, the oil breaks down, and then you get wear, leaks, and eventually gear failure. I always tell clients to check the gearbox oil temperature regularly; it should be around 60 to 70°C max. If it’s going over 80°C, that’s a sign you either need the right oil, or you have a cooling issue, or your gearbox is under too much load.
Then we have the bearings—both the roller bearings and the main shaft bearings. These are smaller, but they’re super important because they keep everything rotating smoothly. For roller bearings, we recommend high-temperature, high-pressure grease with molybdenum disulfide (MoS2) additives. Grease is better here than oil because it stays in place longer, doesn’t leak out, and the MoS2 provides extra protection when the bearings are under load. We specify a NLGI grade 2 grease, which is the right consistency—thick enough to not throw off the bearing, but not so thick that it creates drag. For the main shaft bearings, which might run a little hotter, we sometimes suggest a synthetic version of this grease, because synthetics handle high temperatures way better than petroleum-based greases. I’ve seen clients use generic lithium grease for bearings, and within a few months, their bearings were making noise and seizing up. Lithium grease doesn’t have the EP properties or temperature stability needed for high-load cold forging, so it breaks down fast.
Wait, and I can’t forget about the hydraulic system on the machine, if you have one. A lot of our roller cold forging machines have hydraulic systems that control the roller pressure or feed the raw metal. For those, we use anti-wear (AW) hydraulic oils with ISO VG 46 viscosity. AW oils are designed to protect hydraulic pumps and valves from wear, and they have good anti-corrosion properties too, which is important because hydraulic systems can get moisture in them over time. Don’t use regular gear oil here—gear oil has too many additives that can mess up the hydraulic seals, leading to leaks. That’s another common mistake I see.
Now, let’s talk about some big mistakes I see clients making all the time, because even if you get the right lubricant, if you use it wrong, it’s useless. First, over-lubricating. I know it sounds like more is better, but on a roller cold forging machine, over-lubricating the rollers can get the oil on the raw metal, which causes the formed parts to have surface defects—like discoloration or uneven texture. And over-lubricating bearings can lead to too much drag, overheating, and even seal damage. Second, not changing the lubricants on schedule. A lot of clients wait until something breaks to change the oil or grease, but if you stick to a schedule—usually every 3 to 6 months, depending on how many hours the machine runs—you’ll avoid 90% of the wear issues. Third, mixing different lubricants. Never mix EP gear oil with AW hydraulic oil, or petroleum grease with synthetic grease. They have different additive packages that can react and break down, leading to way more wear.
Oh, and one more thing: when we sell our roller cold forging machines, we always include a detailed lubrication guide, specific to that model, with exact viscosities, grease types, and change intervals. But I know a lot of clients lose that guide, or skip reading it, so I always tell them to shoot me a message if they need a new copy—no hassle.
At the end of the day, choosing the right lubricant isn’t just a maintenance step—it’s a way to save money, extend the life of your machine, and make better parts. Our roller cold forging machines are built to run hard, but they depend on the right lube to do their job properly. If you’re new to cold forging, or you’ve been having issues with your machine’s performance, don’t guess on the lubricants. Reach out to our team, tell us what kind of machine you have, how many hours a week you run it, and what parts you’re having trouble with, and we can hook you up with the exact lubricants you need, plus any maintenance tips to keep your machine running like new. We’ve worked with small job shops and big automotive manufacturers, so we know what works for every level of operation.

Don’t wait until your rollers are worn or your gearbox is seizing up—take care of your machine with the right lubricants now, and you’ll be way ahead. If you have questions about lubricants for your roller cold forging machine, or you’re looking to invest in a new machine that’s built with proper lubrication systems in mind, just get in touch with our team to chat. We’re here to help you keep your production running smoothly.
Screw Auto Packing Machine References
- Society of Manufacturing Engineers (SME). "Cold Forging Lubrication and Maintenance Guide." 2021.
- ISO Standard 12925-1. "Lubricants, industrial oils and related products (class L) — Family C (Gear oils) — Part 1: Industrial gear oils." 2018.
- NLGI (National Lubricating Grease Institute). "Grease Selection Guide for High-Load Industrial Equipment." 2020.
Shandong Prolu Machinery Technology Co., Ltd.
Shandong Prolu Machinery Technology Co., Ltd. is well-known as one of the leading roller cold forging machine manufacturers and suppliers in China. Please feel free to buy high quality roller cold forging machine for sale here from our factory. Contact us for quotation.
Address: No.6326 Jingshi West Road, Jinan City, Shandong Province, China
E-mail: lu18853107186@163.com
WebSite: https://www.prolumachinery.com/