Equal M10 Gasket Sanitary Plate Heat Exchanger

Equal M10 Gasket Sanitary Plate Heat ExchangerWorking principleThe plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of two fluids between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts.

Featured Products

Equal M10 Gasket Sanitary Plate Heat Exchanger
Working principle
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of two fluids between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the channel and directs the fluids into alternate channels. The number of plates are determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure.

Frame
The plates and the pressure plate are located by an upper bar and a lower bar, both of which are fixed to the support column. On the largest type some tightening bolts are equipped with ball bearing washers in order to facilitate opening and closing of the unit. The frame is designed for mounting on a floor only. Standard feet are fixed. One unit can contain several sections, separated by connection plates with interchangeable connections.

Plates
The corrugation of the plates provides a passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer. Corner ports and gaskets are arranged so that the two media flow through alternate channels. The plates have a chevron pattern for maximum strength at high working pressures. Different chevron designs are available, in order to obtain optimal high heat transfer and low pressure drop. A unique distribution area provides an even flow over the plate surface. The plates are reversible and have parallel flow, which means only one type of plate is needed.

Dependable design
The BAODE gasketed plate heat exchangers provides gentle, yet efficient, heating and cooling and meets all sanitary requirements. Typical applications include dairy, food and beverage, and other sanitary processes such as:
Milk and beverage processing
Wine tempering
Bottled water treatment
CIP (Cleaning-in-Place) heating
Reverse osmosis water

Cooling and heating of dairy, brewery, beverage and viscous products and milk pasteurization and pasteurization in some applications

Short delivery time.
High quality
Reasonable price
Customer made
Know-how design and customer support

Model 

BS100

Cross Reference 

M10M,  M10B 

  Height,  H [mm] 

1084

1084

Width,  W [mm] 

470

470

  Min standard length,  L [mm] 

700

700

  Max standard length,  L [mm] 

2300

2300

Vertical port distance,  VC [mm] 

719

719

  Horizontal port distance,  HC [mm] 

225

225

  Max temperature [°C] 

180

180

 Max pressure [barg] 

10

16

 Flange size 

DN100/4" 

DN100/4" 

  Max. flow rate [kg/s] 

50

Equal M10 Gasket Sanitary Plate Heat Exchanger
Equal M10 Gasket Sanitary Plate Heat Exchanger
Equal M10 Gasket Sanitary Plate Heat Exchanger
Equal M10 Gasket Sanitary Plate Heat Exchanger
Equal M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat ExchangerEqual M10 Gasket Sanitary Plate Heat Exchanger
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours