Bb30b M3 replacement gasket plate heat exchanger for marine oil cooling

Product DimensionModel A(mm)B(mm)C(mm)D(mm)E(mm)MAX.LC(mm)Connection(mm)Exchange area(m2)Max. Number of platesMax.volume flow(m3/h)Design Pressure(Mpa)B30BN(2.5+x)18060480357500320.0326003601.0/1.6/2.5ApplicationRefrigeration Systems:Evaporator,Condenser,Economizers and DesuperheatersAir dryerHeat pumpAbsorption c

Featured Products

Product Dimension
Bb30b M3 Replacement Gasket Plate Heat Exchanger for Marine Oil Cooling

Model 

A
(mm)

B
(mm)
C
(mm)
D
(mm)
E
(mm)
MAX.
LC
(mm)
Connection
(mm)
Exchange 
area
(m2)
Max. Number of platesMax.
volume 
flow
(m3/h)
Design Pressure
(Mpa)

B30B

N(2.5+x)

180

60

480

357

500

32

0.032

600

360

1.0/1.6/2.5



Application
Refrigeration Systems:
Evaporator,
Condenser,
Economizers and Desuperheaters
Air dryer
Heat pump
Absorption chiller
HVAC
Radiant Floor,
Snow Melt,
Boiler and
Solar water heat exchanger
District heating
Other Industrial applications such as:
Heat Recovery and
Oil Cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.
Steam Heating.
Flat plate heat exchanger
Beer wort cooler
Milk pasteurization
Wind turbine oil cooler
Marine oil cooler



YOJO Heat Exchanger Advantage:

High Efficiency

The embossed pattern of the YOJO's special heat transfer plates promotes high turbulence at low fluid velocities. The high turbulence results in very high heat transfer coefficients.

Compact Size

YOJO's brazed heat exchanger can be anywhere from 50% to 80% smaller than other types of heat exchangers. It requires less floor space due to the high thermal efficiency of the stainless steel. The plates are brazed together at high temperatures, allowing the heat exchanger to be compact, leak tight, and rugged.

Close Approach Temperatures

Close-approach temperatures of 1-2°F (0.5-1.0°C) are possible because of true counter flow and high heat transfer efficiency of the plates. This is an important factor in regeneration and heat recovery processes.

High Temperature and Pressure Ratings

YOJO's Brazed Plate Heat Exchanger maximum working pressures from 300 psi to 650 psi, and temperature ratings of 350°F.


YOJO BPHE Product
Bb30b M3 Replacement Gasket Plate Heat Exchanger for Marine Oil Cooling




YOJO Factory Show
Bb30b M3 Replacement Gasket Plate Heat Exchanger for Marine Oil Cooling
 


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours